Bench
The bench is a monolithic and milled block. It is an integral part of the guillotine shear and like the rest of the structure it has been designed and optimized with FEA methods (Finite Element Analysis). The bench is equipped with movable elements with scroll balls, freely repositionable over the entire length of the bench to fit the needs of the operator.
To protect the most delicate surfaces, the bench can be equipped with nylon ball transfers. These ball transfers can be mounted on a disappearing system. This option raises the sheet metal on the supply side, while the movable blade returns to the starting position, eliminating the contact between the blade and the sheet itself. This results in the reduction of scratches and imperfections on the edge of the work-piece, improving the quality of the finished piece. It also helps to save the cutting edge of the lower blade from scratching against the metal sheet.
Front supports
Standard front supports are fixed to the bench with screw clamping and can be repositioned according to the needs. They are equipped with a few standard accessories:
- Disappearing gauge
- Ball transfers
- Measure ruler
- Squaring arm with side stop
Other options are available upon request:
- Extended version: +1000 mm
- Anti-scratch brushes
- Protractor for oblique cuts
Technical data
| Model | 2004 | 3004 | 4004 | 6004 | 2006 | 3006 | 4006 | 6006 | 2010 | 3010 | 4010 | 6010 | 3012 | 4012 | 6012 | units |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of front supports | 1 | 2 | 3 | 5 | 1 | 2 | 3 | 5 | 1 | 2 | 3 | 5 | 2 | 3 | 5 | n° |
| Length of supports from the blade | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | mm |
| Length of squaring arm from the blade | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | mm |
